I have been trying to sort out my starts but I have no luck. Lots of kickbacks. Some time she starts. Some time not. Not very reliable

How do I log a start.

My computer skills are limited so I need a very detailed instruction.

Jocke.........

greenmonster wrote on 11/03/09 at 02:30:12:


How does your start map look? Which prime and crank values do you use?

Jocke

Have a look at this link to get hyperterminal running
http://www.cajinnovations.com/MyECU/SerialComms.htm

Then within hyperterminal, go into Transfer->Capture Text

Before clicking diagnostics, load a map into ECUControl. That should do it.

Put simply, it should be the map that was used when producing the log - but as far as I can tell the only important stuff is static things like TDC, CylOffs, PulsesPer and MissingPulses.

Edit: you said you loaded a map, sorry... here's take two:

Try opening the .dmp file with Wordpad, then chose Save As, and save as type "Text Document - MS-DOS format" with a new name. Then try again using that new file.

If this works, there is a setting in Hyperterminal for appending line feeds but that is a later problem. I recall Hubert said this must be done but I never had the problem. Maybe I already had this setting from some other adventures.

I think that the problem is that when I am going to save the file it comes up a dialog box that sais open, not save. Is that normal????????? I think is it should say "save in"





Jocke.......

Check this out

Map (0.0,0.0) Thro=88 RPM=213 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=2.35V,2.36V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.41V Inj=0us BaroAdj=129.9%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=2.35V,2.35V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.39V Inj=0us BaroAdj=129.9%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=1.27V,1.26V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.41V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.72V,0.70V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.41V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.52V,0.50V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.41V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.42V,0.42V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.39V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.38V,0.38V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.39V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.36V,0.36V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.39V Inj=0us BaroAdj=129.8%
Map (0.0,0.0) Thro=88 RPM=200 o2Adj=100.0%,100.0% o2[0] o2Target=0.00V o2=0.35V,0.35V OilT=11.0C AirT=12.0C AirP=986mb Bat=12.39V Inj=0us BaroAdj=129.8%

I changed the extension from .DMP to txt. Then I opened with notepad I think. Then I saved it (save as) and changed the file name to from .txt to .dos and it works.

Dont ask me why.

Now I am just waiting for my fuel injectors to arrive back from cleaning so I can do som loggings.

Thanks for the help boys.

Jocke............

YaBB Administrator wrote on 11/21/09 at 06:24:05:


Okay. I will give it a try. Here it is            I think.

http://virdung.net/log.dmp

Ande here is the on that has had the name changend that actualy works

http://virdung.net/log.dos

And here is a map

http://virdung.net/21nov.ecu

This map has a lot of fuel in the starting. Much more then I think is good but I will give it a go as soon as my injectors are back.

I am not sure if it works.

Edit. I think that it is working

Is it possible to attach the file in a more easy way or do I always have to upload it on my homepage first?

Jocke..........