Welcome, Guest. Please Login or Register
MyECU main site
  Welcome to our forum.
  HomeHelpSearchLoginRegister  
 
Page Index Toggle Pages: 1
Send Topic Print
Map for V7 with an 820cc kit (Read 269 times)
sign216
Full Member
***
Offline



Posts: 165
Map for V7 with an 820cc kit
08/06/18 at 08:02:26
 
Attached is my final map for my '09 V7 (Heron heads) with an Italian RAM 820cc kit and the MyECU controller. 

The bike was suffering from severe knocking and lean running, due to the increased capacity (820cc) with no increase in fuel.  Still, even with the MyECU and increased fuel, I had knocking until I retarded the spark. 

This is my final running map, and is different from Cliff's orig. Breva 750 map with 22% retard around the the 4k rpm mark where I had pinging, and approx 8% injection duration prime to account for the increased capacity. 

In the orig map I had severe pinging right at 4k rpm, esp on acceleration or hard throttle.

Hope this helps other users.  This map is good, but could be tweaked some more. Joe
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print