| CAJ Innovations Forums | |
|
https://cajinnovations.com/yabb0/YaBB.pl
MyECU >> MyECU Advanced usage >> atmega32 avrdude verification error https://cajinnovations.com/yabb0/YaBB.pl?num=1503493167 Message started by aco31 on 08/23/17 at 22:59:27 |
|
|
Title: atmega32 avrdude verification error Post by aco31 on 08/23/17 at 22:59:27
hi cliff,
I'm trying to load My16M_32.hexfile into my chip. But at the end of operation the verification fails. I have the same result with 2 chips. I use avr pocket programmer from sparkfun as you advisored me. What's the mismatch. thanks avrdude: verifying ... avrdude: 1 bytes of hfuse verified avrdude: reading input file "My16M_32.hex" avrdude: input file My16M_32.hex auto detected as Intel Hex avrdude: writing flash (32576 bytes): Writing | ################################################## | 100% 29.73s avrdude: 32576 bytes of flash written avrdude: verifying flash memory against My16M_32.hex: avrdude: load data flash data from input file My16M_32.hex: avrdude: input file My16M_32.hex auto detected as Intel Hex avrdude: input file My16M_32.hex contains 32576 bytes avrdude: reading on-chip flash data: Reading | ################################################## | 100% 27.79s avrdude: verifying ... avrdude: verification error, first mismatch at byte 0x0000 0x00 != 0x0c avrdude: verification error; content mismatch |
|
Title: Re: atmega32 avrdude verification error Post by YaBB Administrator on 08/24/17 at 07:13:04 I see that once in while. I usually retry or jiggle the connector. Is the ECU powered when you are doing this? Can you send the complete output to me via email as I can't place you with this post or determine where you got the programming command from. |
|
Title: Re: atmega32 avrdude verification error Post by aco31 on 08/24/17 at 21:29:29
hi,
The ecu is powered by stabilized supply with 12v. I send you the complete output . Thanks |
|
CAJ Innovations Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |