CAJ Innovations Forums - A couple Q's

guzzisteve

YaBB Newbies

Offline

I love MyECU!

Posts: 39
Atl area, Georgia, USA
Gender: male

A couple Q's
01/01/17 at 11:05:44

Been 3 yr's on the shelf but back w/MyEcu P8. I now have more time, made a map, put it in and the power on bike got interrupted (dodgy plug for ign sw).
Is this a bad thing?

It seems that it will not up load into ecu, it says it is w/green bar then locks. Turn off key, unplug & go ride. It seemed different but w/I suck it out to file it's the one I started with.
I tried it 5 times w/o interruption w/same results
My optimizer says the same thing, that the map hasn't changed.
I can modify it w/latest software(no blutooth android) but no upload
Any Idea's ?

Back to top

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: A couple Q's Reply #1 - 01/01/17 at 15:59:58 I'm unclear as to what you are doing. Not sure what the green bar is as I've not run the PC software in years? Which ECUController version did you get with the ECU and which latest did you try? The ECUController will produce a log file if enabled. Why don't you log the power up of ECU and the download of the map and send that to me.
Back to top	The Administrator. IP Logged

guzzisteve

YaBB Newbies

Offline

I love MyECU!

Posts: 39
Atl area, Georgia, USA
Gender: male

Re: A couple Q's
Reply #2 - 01/02/17 at 02:11:59

I think the ECU is a MK3 and the Optimizer is 4.8.73 when you power it up.
I got control version 151 & 160b w/I bought the P8. I was reading on here and got your last one 168 w/I used last to put a txt file map into the P8.
Everything works as it did 3yrs ago, cept loading a map into ecu.
After riding the bike and I go to make changes, there is no new map in the ecu.
I've never logged anything, mine is before android came out.

Back to top

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: A couple Q's Reply #3 - 01/03/17 at 08:42:13 With 168, I believe you can turn on logging from ECU diagnostics. What happens if you try and get the map in the ECU?
Back to top	The Administrator. IP Logged

raz Senior Member Offline Guzzi 11OO Sport, My16MkV, Innovate LC-1 Posts: 373 Stockholm, Sweden Gender:	Re: A couple Q's Reply #4 - 01/03/17 at 11:14:08 Is temperature readings etc. shown correctly on the computer? If not this sounds just like when I accidentally used a crossover cable as opposed to a straight one. But if you use the same cable as used for the Optimizer my theory fails.
Back to top	59° North 1100 Sport iniezione elettronica -- the perfect merge of a superbike and a steam train IP Logged

guzzisteve

YaBB Newbies

Offline

I love MyECU!

Posts: 39
Atl area, Georgia, USA
Gender: male

Re: A couple Q's
Reply #5 - 01/03/17 at 13:41:50

All the readings in real time are correct as they appear.

I get the same map every time w/I get map from ecu. It doesn't change after I put an .ecu file in.
I don't know how to do logging, w/I hit that button it just makes a file and nothing goes into it. My laptop doesn't open a .raw file like it makes.
I use the wire I got w/MyEcu
Could I load a back-up into my optimizer from my laptop w/same cable?
I can change the map in the ecu w/optimizer and it is changed w/I get the file from ecu.

Back to top

« Last Edit: 01/03/17 at 13:49:35 by guzzisteve »

IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: A couple Q's Reply #6 - 01/04/17 at 07:32:51 The raw file is just a text file. You can open it with your favourite editor. It sounds like the only thing not working is the map upload. Do you see the dot traversing the grid as it transfers? Perhaps the problem is with the map you have created. How did you modify it? Attach a copy of the map here.
Back to top	The Administrator. IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: A couple Q's Reply #7 - 01/04/17 at 07:36:40 Which version did you try to log with because the 1.68 I fired up wants to create c:\ECUout.txt by default?
Back to top	The Administrator. IP Logged

guzzisteve YaBB Newbies Offline I love MyECU! Posts: 39 Atl area, Georgia, USA Gender:	Re: A couple Q's Reply #8 - 01/06/17 at 02:56:29 Hope the logging worked, it seemed it did. Let's see if I can attach it here. There you go, success.
Back to top	« Last Edit: 01/06/17 at 02:58:34 by guzzisteve » raw2.txt (102 KB \| 323 ) raw.txt (120 KB \| 332 ) IP Logged

YaBB Administrator YaBB Administrator Offline I love YaBB! Posts: 679 The Land of YaBB	Re: A couple Q's Reply #9 - 01/06/17 at 07:15:03 Those file show the communication is working OK so your issues was just the file name you were using.
Back to top	The Administrator. IP Logged

guzzisteve YaBB Newbies Offline I love MyECU! Posts: 39 Atl area, Georgia, USA Gender:	Re: A couple Q's Reply #10 - 01/06/17 at 08:46:35 So, according to the log, the map goes in? I didn't go out for a ride but I had the optimizer wired up and it was reading numbers off the old map. Then I was trying to change it w/optimizer.
Back to top	IP Logged

YaBB Administrator

Offline

I love YaBB!

Posts: 679
The Land of YaBB

Re: A couple Q's
Reply #11 - 01/06/17 at 10:00:16

I assumed it was OK because you said in your email "and it worked".

The log doesn't show any errors but there are a few anomalies. Both files look like you may of hit download multiple times because there seem to be two or three threads running through the cell entries simultaneously.

Try using v168 as it should have better logging and bug fixes.

The best way to see if it has worked is to upload the map after you have programmed it and compare with the original or the desired. They are usually some small rounding errors.

Back to top

The Administrator.

IP Logged

guzzisteve

YaBB Newbies

Offline

I love MyECU!

Posts: 39
Atl area, Georgia, USA
Gender: male

Re: A couple Q's
Reply #12 - 01/07/17 at 00:46:18

Sorry, success in adding attachments. As for the file, hasn't gone in yet. I logged a start & run after the file upload to ecu but forgot to make it a txt file and I can't attach .raw..
I'll get another.
I only hit the button once for each process.
Could it be something from my laptop messing w/it, like download speed or other stuff. I know I have to shut off firewall and things to use some bike software as it interferes.

Back to top

« Last Edit: 01/07/17 at 00:55:32 by guzzisteve »

IP Logged

guzzisteve YaBB Newbies Offline I love MyECU! Posts: 39 Atl area, Georgia, USA Gender:	Re: A couple Q's Reply #13 - 01/07/17 at 08:36:29 Another 2 #7 is the download into ecu. #8 is bike running afterwards
Back to top	raw7.txt (70 KB \| 335 ) raw8.txt (86 KB \| 308 ) IP Logged

guzzisteve YaBB Newbies Offline I love MyECU! Posts: 39 Atl area, Georgia, USA Gender:	Re: A couple Q's Reply #14 - 01/08/17 at 09:39:15 Shutting off firewall and such made no diff. How about changing the bit speed in the port that communicates?
Back to top	IP Logged

	Welcome, Guest. Please Login or Register
	Welcome to our forum.