11/12/24 at 03:31:06
Welcome, Guest. Please
Login
or
Register
Welcome to our forum.
Home
Help
Search
Login
Register
CAJ Innovations Forums
›
MyECU
›
Maps
› 16M for Ducati 996 with twin injectors
(Moderator: _Cliff_)
‹
Previous Topic
|
Next Topic
›
Pages: 1
16M for Ducati 996 with twin injectors (Read 7052 times)
YaBB Administrator
YaBB Administrator
Offline
I love YaBB!
Posts: 679
The Land of YaBB
16M for Ducati 996 with twin injectors
06/12/15 at 05:41:43
This map comes courtesy of Peter in Brisbane.
Pete often helps new MyECU users in his area for me .
He writes
"From 2500 rpm to redline this thing pulls like an under 16 football team at a strip club for the first time with no hesitation or lag anywhere (except 6th gear, but it is so over geared it’s not funny, in 6th it goes hard from 3000 rpm). Power wheelies no problem at all. This thing will now make you want to throw your licence away before the Police do it for you."
Back to top
09_2000_996_Ducati_twin_injector_16M.ecu
(11 KB |
549
)
The Administrator.
IP Logged
sign216
Full Member
Offline
Posts: 176
Re: 16M for Ducati 996 with twin injectors
Reply #1 -
06/13/15 at 13:10:00
Pete has a good way with words.
Sorry, that's all I have for this topic.
Back to top
IP Logged
Mad Farquhar
Full Member
Offline
Slainthe mhath
Posts: 171
Black Isle, Scotland
Gender:
Re: 16M for Ducati 996 with twin injectors
Reply #2 -
06/16/15 at 19:17:34
Back to top
MG Sport 1100 inj
Triking
Honda ST1100
V7 Stone
IP Logged
2 Cylinder Headonist
YaBB Newbies
Offline
I love MyECU!
Posts: 1
Re: 16M for Ducati 996 with twin injectors
Reply #3 -
06/17/15 at 06:34:13
Thank you Cliff for posting this. We have done a little more finer tuning to clean up the bottom end a little tad, please see attached update. (I have also removed the retardation in the std. advance curve from 3k to 4k to make it more linear)
Please bare in mind when I have made these, please remember to close the air bleeds fully. As cliff's ECU gives full adjustability, there is no need to even have these for idle correction. I do the throttle body balancing at 4000 RPM. If you balance the throttle bodies at idle it tends to be out in the higher rpm but as we ride in this range my belief is this is where it should be balanced.
Since working on my good friends 996 (he gave it to me for 10 days, pure heaven) I have succumbed to the sirens song and bought one. This means I will be perfecting this further and as Guzzisti people in SE Queensland know, if I come across an improvement, I will let it be known.
I am currently building a small Test Bed for Air/Ratios using some rollers (filled with oil to give a small resistance) mounted to my bike bench and portable Wide Band Sensor and Accusation Software (sort of a Dyno but just for A/F readings only). This along with Cliff's ECU should be able to give me near spot on mapping for real world applications so I will post updated maps for both the Guzzi 1100 Sport and Ducati 996S, watch this space.
Regards, Peter
Back to top
Ducati_996_Twin_Injectors_Update.ecu
(11 KB |
482
)
IP Logged
996SPS
Junior Member
Offline
ducati with P8
Posts: 60
Finland
Re: 16M for Ducati 996 with twin injectors
Reply #4 -
06/17/15 at 17:43:43
Interesting information, will be following closely the progress..
I've been lazy, haven't gotten anywhere with my own MyP8..
Really need to activate myself on this.
Back to top
http://myducati.wordpress.com
IP Logged
YaBB Administrator
YaBB Administrator
Offline
I love YaBB!
Posts: 679
The Land of YaBB
Re: 16M for Ducati 996 with twin injectors
Reply #5 -
06/22/15 at 08:38:09
Keep in mind this map is for the My16M. You will need to do a cut and past to keep your MyP8 configuration related lines. These are at the top of the file.
Back to top
The Administrator.
IP Logged
996SPS
Junior Member
Offline
ducati with P8
Posts: 60
Finland
Re: 16M for Ducati 996 with twin injectors
Reply #6 -
06/22/15 at 18:33:26
Yes.
Was going to take the injection durations, advances and what not only from this one.
Back to top
http://myducati.wordpress.com
IP Logged
Flype
YaBB Newbies
Offline
I love MyECU!
Posts: 1
Re: 16M for Ducati 996 with twin injectors
Reply #7 -
08/23/15 at 21:08:10
Hello, I'am an italian Ducati 996 owner and I'm very intested in this topic!
Back to top
IP Logged
MarkS
YaBB Newbies
Offline
I love MyECU!
Posts: 1
Re: 16M for Ducati 996 with twin injectors
Reply #8 -
01/22/24 at 10:40:23
Hi everyone, I'm new to both the MyECU and forum and have been fiddling with my 996 utilizing the updated 996 Twin Injector map found in this thread.
The bike seems to start and run fine, but quick throttle blips or downshifts while decelerating seem to make it die. My plugs are gapped at .024 and have been replaced a few years back. The plug wires are original so I am wondering if those should be replaced.
Back to top
IP Logged
Motociclo
YaBB Newbies
Offline
Hold it flat!!!
Posts: 32
Re: 16M for Ducati 996 with twin injectors
Reply #9 -
01/23/24 at 02:07:07
Contact Cliff, he'll sort you.
Mine did a similar thing initially.
Back to top
IP Logged
Pages: 1
‹
Previous Topic
|
Next Topic
›
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
General Category
- General Board
- Test Zone
MyECU
- MyECU Announcements
- MyECU Kit Construction
- Getting started with MyECU
- MyECU Advanced usage
- Developments and wishs lists
- Maps ««
« Home
‹ Board
Top of this page
CAJ Innovations Forums
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.